Is the city's arterial roads. Main lighting for street lights, road lights are set up on the road for vehicles and pedestrians at night to provide the necessary visibility of the lighting. Road lights can improve traffic conditions, reduce driver fatigue, and help to improve road capacity and ensure traffic safety. Garden lights, landscape lights and street lights to form a three-dimensional illumination pattern, enhance the decorative effect of roads, beautify the urban landscape, but also compensate for the lack of road lamp illumination. 1. Lawn Lamp: Lamp High 0.3-1.2m, mainly used for the irradiation plant, creating an atmosphere or narrow sidewalks, lighting plays a guiding role 2. Garden Lights and Landscape: 4-12m height lamppost in between, such lighting design diverse, design and attention to detail partially treated, usually set on the side of the road, but also the position of the lamp can be freely arranged, 3. ordinary roads and parking lights: light body height 4-12m, modeling generally relatively simple, relatively light Strong, light from around 20-50m 4. high pole lights: high pole lights between 20-40m in height, illumination range is relatively wide, these lights are generally used for Station Square, a large car park, open-air stadium, a major exhibition field etc. 5. Solar lights: solar lights height between 6-12m, green energy, no cable, safe, reliable, easy to move. Long working hours, low maintenance costs. Solar panel life of up to 20 years, LED light-emitting diodes up to 100,000 operating hours road lights to use: 1, according to the actual lighting needs to be installed on-site to determine the appropriate lighting installation (capitals and lateral), adjust the installation bracket. Then press the lamp away from the power contacts to prepare the corresponding three-core cable length. 2, the front of the buckle hand Bankai lamps, opened the rear cover and the cable through the cable into the back of the introduction of the lamp fixture hole cavity, according to the seat of the luminaire wiring polarity indicated a good cable (FireWire take "L" position, zero line "N" position, the ground wire to connect status), take a good line after the restraining wire tablet cable. 3, the pole is introduced into the mounting bracket holes, and choose to take pole position in the bracket according to the angle of the barrel proper lighting needs, matter bolts clamping poles firmly connected to the poles and lamps . 4, replace the lamp, unscrew and pull out the lamp holder, unscrew the old bulb and put a new lamp and lamp holder lamp installed according to the appropriate gear (400W Lamp outermost gear, 250W lamps use innermost gear, middle gear for regulating use) into the lamp chamber and tighten fixed. 5. Close the rear cover and lock hasp, the three-core cable connected to the mains can achieve lighting. Road lights are widely used in factories roads, highways levels, urban roads and other places for road lighting. If necessary, please contact us.